China Fabric Factory Fabric News Air jet reed maintenance and management

Air jet reed maintenance and management



Maintenance and management of air jet reed 1. Maintenance of air jet reed (1) Clean the yarn. (2) Cleaning the air jet reed: using artificial wool surface cleaning and mechanical c…

Maintenance and management of air jet reed

1. Maintenance of air jet reed (1) Clean the yarn. (2) Cleaning the air jet reed: using artificial wool surface cleaning and mechanical cleaning. A special ultrasonic cleaning machine for steel reeds can be used. Different cleaning fluids can be selected according to the adhesion of oil stains or slurries to effectively remove dirt on the reed teeth and protect the air-jet reed from damage. (3) Check the air-jet reed for defects such as reed tooth damage, crushing, loose teeth, wear and cracking, etc., and classify and count them. (4) Correct the uniformity of the reed tooth gap, the flatness and inclination of the reed surface. Use a skilled technician with experience in reeding to correct the gap between the reed teeth and use suitable reeding tools to avoid worsening of unevenness. (5) How to replace worn reed teeth. Air-jet reed teeth are bonded with special resin glue. Replacement requires a lot of work. You should go to a professional air-jet reed repair unit to replace the reed teeth. Do not replace them yourself. After replacing the reed teeth, the air pressure value should be checked and corrected, and the machine can be used only after meeting the usage requirements. If the reed teeth are damaged or worn in a large area, the aluminum reed beam should be replaced. (6) Depending on the quality of the weft yarn, there will be fluff or thread slurry accumulated between the reed teeth. These dirt will cause weft insertion failure or contaminate the fabric. There are two methods for cleaning off the machine and cleaning with the loom installed. ① When cleaning the air-jet reed when it is installed on the loom, dry cleaning without water and cleaning agent and wet cleaning with water or cleaning agent can be adopted. ② When dismounting the machine for cleaning, if possible, use an ultrasonic cleaning machine, blow dry with compressed air, and use advanced cleaning technology to thoroughly clean the reed. Attached: Introduction to the ultrasonic cleaning machine dedicated to jet reeds (see Table 8-15 for model specifications). This machine is a special equipment developed for cleaning reed dirt. It has the characteristics of strong ability to remove oil dirt and slurry and high efficiency. The unique ultrasonic moving reciprocating cleaning function can ensure that the reed is not damaged internally. It is a reliable and reliable reed cleaning equipment necessary for fabric operations. Main technical indicators and features: ① Cleaning various shuttleless loom reeds and unusual-shaped reeds. ②The cleaning tank is made of stainless steel plate, which is acid and alkali resistant. ③Automatic temperature control, automatic timing, automatic shutdown, and fully automatic cleaning process. ④ Ultrasonic waves move at a constant speed, reciprocating cleaning, and protecting the reed from damage. ⑤ Ultrasonic operating frequency is 42kHz, which has strong cleaning ability and can easily remove firmly adhered oil stains and slurries. ⑥High cleaning efficiency, 20 to 30 steel reeds can be cleaned in 8 hours.

AAADFGTEHTRY

Extendedreading:https://www.alltextile.cn/product/product-44-111.html
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
ExtendedReading:
Extendedreading:
Extendedread

This article is from the Internet, does not represent 【www.factory-fabric.com】 position, reproduced please specify the source.https://www.factory-fabric.com/archives/32949

Author: clsrich

 
TOP
Home
News
Product
Application
Search